Structural Framing Contractor Services
Framing Contractors for New Builds, Additions & Structural Work
CanaCore coordinates verified framing contractors for new construction, home additions, and structural modifications — wall, floor, and roof framing built square, level, and to code, with CanaCore field supervision throughout the build.
What Is Framing?
Framing is the structural skeleton of any building—the system of wooden or steel members that support floors, walls, and roofs. Quality framing ensures your building is square, plumb, level, and capable of safely carrying all design loads including occupancy, snow, wind, and seismic forces. Professional framing follows engineered plans, uses code-compliant materials and techniques, and passes rigorous municipal inspections. It's the most critical phase of construction—everything else depends on framing done right.
Engineered structural systems
Common Framing Applications
Professional framing services for every type of construction project
New Home Framing
Complete structural framing for new residential construction from foundation to roof.
Addition Framing
Structural framing for home additions, second stories, and room expansions.
Load-Bearing Wall Removal
Install beams and support systems when removing structural walls for open concepts.
Roof Framing
Trusses, rafters, and structural roof systems for new builds and replacements.
Floor System Framing
Joists, beams, and subfloor installation for new construction and renovations.
Deck & Porch Framing
Structural framing for outdoor living spaces and covered porches.
Our Step-by-Step Process
From material delivery to final inspection approval
Plan Review & Material Ordering
1-2 daysReview structural plans, verify dimensions, and order lumber, hardware, and materials.
Site Preparation
1 dayEnsure foundation is ready, level, and properly anchored for framing to begin.
Wall Framing
3-7 daysBuild and erect exterior and interior walls with proper headers, studs, and plates.
Floor System Installation
2-4 daysInstall joists, blocking, and subfloor with proper spacing and fastening.
Roof Framing
3-5 daysSet trusses or frame rafters, install sheathing, and prepare for roofing.
Inspection & Corrections
1-2 daysMunicipal framing inspection and address any required corrections.
Professional Equipment & Techniques
Industry-leading tools for precise, efficient framing
Framing Nailers
Fast, accurate fastening of lumber
Circular & Miter Saws
Precision cutting of framing members
Laser Levels
Accurate layout and leveling
Scaffolding & Ladders
Safe access to all work areas
Engineering Plans
Code-compliant structural design
Safety Equipment
Fall protection and PPE
Compliance & Safety Standards
Every framing project meets or exceeds building code requirements
Structural Standards
- Building code-compliant framing
- Engineered beam and header sizing
- Proper joist spacing and blocking
- Hurricane ties and seismic strapping
Safety Protocols
- Fall protection systems
- Proper scaffolding and bracing
- Safe material handling practices
- Occupational health & safety compliant job site
Quality Assurance
- Verified framing contractors
- Municipal inspection compliance
- Engineered lumber verification
- CanaCore field supervision
Related Services
Complete your project with these complementary services
“CanaCore's framing crew built our home addition perfectly square and level. The city inspector commented it was some of the best framing he'd seen. Everything else—drywall, trim, flooring—went smoothly because the framing was done right. Professional team from start to finish.”
Ready for Professional Framing?
Get a free quote from verified framing contractors. CanaCore coordinates the trades and supervises the work in the field for quality and code compliance.
Common questions
What drives the cost of a framing job?
Mostly the amount of lumber and the complexity of the layout — long walls and simple partitions frame quickly, while stairwells, tall ceilings, curved walls and anything that ties into existing structure takes longer. Lumber pricing and whether beams or headers are needed also move the number.
Does framing get inspected before it is covered up?
Yes. A framing inspection normally happens after rough-in electrical, plumbing and any HVAC are in place but before insulation and drywall, so the inspector can see the structure. We schedule the field work around that hold point so nothing is closed in too early.
Can you frame a new interior wall in an existing house?
Yes — new partition walls, closets and room divisions are common. If the new wall carries load or you are removing an existing one, that becomes a structural question and may need drawings and an engineer before the framing starts.
Read before you start
Practical guidance from the CanaCore Guide on this type of work.
- What Inspections Are Required During a Renovation?What inspections are required during an Ontario renovation? Building, framing, plumbing, HVAC, electrical rough-in, and final inspection stages explained.
- How to Prepare Your Home Before Construction StartsHow to prepare your home before construction starts—protect belongings, plan access, set site rules, utilities, and safety for Ontario renovations.
- Common Reasons Construction Projects Go Over BudgetCommon reasons renovations go over budget in Ontario—scope creep, hidden conditions, change orders, and bidding gaps—and how to stay on track.
- How Construction Permits Work in Ontario (Step-by-Step)How construction permits work in Ontario—drawings, submission, review, inspections, and occupancy. A clear step-by-step guide for homeowners.